HCT Polaris RZR XP 1000 XP1000 ECU Performance Tuning
- STAGE 1 +6.5 Engine HP 4.9 WHP (91 Octane)
- STAGE 1.5 +8.1 Engine HP 6.8 WHP (91 Octane) + (High flow filter required)
- STAGE 2 +9.8 Engine HP 8.2 WHP (91 Octane) + (Exhaust required)
- STAGE 3 +11.5 Engine HP 10.2 WHP (91 Octane) + (Intake and Exhaust)
- Vmax Delete (Speed Limiter Removed)
- Rev Limiters raised in both high and low gear
- Improved throttle response in all modes (E-Gas Settings Improved)
- Improved ignition timing advance optimized for 91 Octane for maximum power
- Fueling adjusted for aftermarket components (intakes, exhausts and cat deletes) for optimal Air/Fuel Ratios
- No need to run a "piggyback" fuel controller with our reflash for most bolt on mods (You are responsible to make sure your mods are compatible with our programming - All HCT and most other aftermarket companies' exhausts are compatible with our programming as well as all HCT intakes)
- Torque Limiters removed ("Shaft Saver delete") for a much more responsive and fun vehicle
- Cooling fan on temperature is lowered by 20 Deg F, but can be set to whatever temperature the customer requests.
- For off road competition use only
HCT Powersports has released its long anticipated Polaris RZR XP1000 ECU re-flash. The Stage 1 tuning is intended for a stock machine with no aftermarket bolt-ons required. 6.5 engine horsepower gains have been realized through timing, fueling and torque limit modifications. We also build additional safety into our tune by lowering the fan on temperature by 20 deg F. The OEM fan on temperature is is too high (well over 200 deg F). In addition the fan on/off temperatures can be set for each customer depending upon where they live and the conditions typically ridden in. Other great features are added and/or changed to enhance the drivability and fun factor of the vehicle. HCT Powersports has vast knowledge of the Polaris RZR ECU from our work in the automotive world and extensive Bosch ECU experience. We have brought this expertise to the SXS market to extract the most performance from the RZR 1000 engine as possible.
We have 3 ways we can get you tuned:
You can either bring in your ECU to our facility and we can flash it by appointment in about 2 hours or you can mail it to us and we can reflash it usually same day or next day and mail it back.
We can flash a new ECU for you for an additional $549.00. you just need to email or text us a picture of your vin.
You can flash it your self using our HCT Flash Cable for an additional $185.00 This gives you the ability to upgrade your tune (for $350.00) or flash back to stock (free) at any time you want with your laptop at home.
Great Features for all stages:
Your ECU can either be mailed or dropped off to our Phoenix, AZ facility for reprogramming or a new ECU is available for an additional $549.99. Questions? 480.500.8995